冷再生的工作寬度為3.8 m，再生深度在0-150 mm之間，配有708 KW高性能發動機，確保再生。該設備既能采用普通的銑刨工藝，冷再生機又能采用維特根研發的下切工藝進行施工。配上輸送帶后，用下切刨刨法所得的混合料，經后送后端的瀝青攤鋪機，并及時均勻攤鋪。
The working width of cold regeneration is 3.8 m, the regeneration depth is between 0-150 mm, equipped with 708 KW high performance engine to ensure efficient regeneration. The equipment can be used for both conventional milling and regeneration using a cutting process developed by Wittgen. After the conveyor belt is fitted, the mixture obtained by the cutting and planing method is sent to the asphalt paver at the back end and evenly spread in time.

再生料寬度為3.8 m寬，可再生100 cm厚的瀝青混凝土層，整個工作寬度一次無縫再生一條車道，施工效率極高，與其配套的攤鋪機具有很大的材料輸送能力，因此原路面材料的不均勻性得以，并可鋪筑出良好的橫斷面

建筑下邊作業大大優化了材料的級配。
The width of the reclaimed material is 3.8 m wide, and the Tarmac layer of 100 cm thick can be regenerated. The entire working width can be regenerated one lane at a time without any gap. The construction efficiency is extremely high, and the paver matched with it has great material conveying capacity, therefore, the non-uniformity of the original pavement material can be eliminated, and good cross-section can be paved under the building to greatly optimize the material gradation.

雙作用：即既能作為后出料，又可用作高性能銑刨機。