就地冷再生攤鋪工藝

　　On site cold recycling paving process

　　雖然生產冷再生材料有幾種不同的方法，但其攤鋪工藝與典型的銑刨回填工藝相似。

　　Although there are several different methods for producing cold recycled materials, their paving process is similar to typical milling and backfilling processes.

　　在傳統的銑刨回填工藝中，攤鋪?zhàn)鳂I(yè)由銑刨機將銑刨好的材料送入卡車。廢料被運走，工作人員跟隨銑刨機清理剩余的灰塵和碎屑。然后，攤鋪人員跟進鋪設新的瀝青。在施工現場、瀝青攪拌站和垃圾填埋場或再生瀝青（RAP）料堆之間來回運輸材料可能需要數百卡車。

　　In the traditional milling and backfilling process, the paving operation first involves the milling machine feeding the milled material into the truck. The waste was transported away, and the staff followed the milling machine to clean up the remaining dust and debris. Then, the paving personnel follow up to lay new asphalt. Transporting materials back and forth between construction sites, asphalt mixing plants, and landfills or recycled asphalt (RAP) piles may require hundreds of trucks.

　　采用就地冷再生工藝時，幾乎所有材料都留在施工現場。再生機將瀝青粉碎，然后將粘合劑注入材料中，材料隨后被輸送到攤鋪機。攤鋪機緊跟在再生機后面運行，將材料鋪回原位，兩到三個壓路機跟在后面進行壓實。再生材料壓實后，傳統的攤鋪機便會鋪設一層磨耗層——厚度為一英寸半到兩英寸的熱拌瀝青路面。

　　When using on-site cold recycling technology, almost all materials are left at the construction site. The recycling machine crushes the asphalt and then injects the binder into the material, which is then transported to the paver. The paver runs closely behind the rejuvenator, laying the material back in place, and two to three rollers follow behind to compact it. After compacting the recycled materials, traditional pavers will lay a layer of wear layer - a hot mix asphalt pavement with a thickness of one and a half inches to two inches.

　　泡沫瀝青這種粘合劑是將再生瀝青 (RAP) 材料打造成柔韌耐用基層的秘訣。它由加熱 175 攝氏度的普通瀝青制成，并在高壓下注入少量水和空氣，使其發泡膨脹。泡沫瀝青被注入冷再生機內的再生瀝青 (RAP) 中，終產品被稱為瀝青穩定材料 (BSM)。

　　Foam asphalt is the secret of making recycled asphalt (RAP) material into flexible and durable base course. It is made of ordinary asphalt heated to 175 degrees Celsius and injected with a small amount of water and air under high pressure to make it foam and expand. The foam asphalt is injected into the recycled asphalt (RAP) in the cold recycling machine, and the final product is called asphalt stabilized material (BSM).

　　這一工藝效率顯著提高，并節省了與傳統鋪路過程相關的運輸和材料成本。Stahl的熱情顯而易見：“當我們進行再生時，好處是于幾乎所有材料，95%的材料，都能夠保持原位?！?/p>

　　This process significantly improves efficiency and saves transportation and material costs associated with traditional paving processes. Stahl's enthusiasm is evident: "When we carry out regeneration, the benefit is that almost all materials, 95% of them, can remain in place

　　Wirtgen提供CR系列和WR系列冷回收機。CR系列機器需要傳統的鋪路機，而WR系列冷回收機和土壤穩定機則不需要。根據斯塔爾的說法，對于將骨料回收到瀝青中的812英寸深度的典型全深度再生（FDR）應用，其中骨料被回收用于瀝青，設備組將使用一臺橡膠輪胎WR系列機，以及一臺羊腳壓路機和一臺平地機，然后再加兩臺壓實機。羊腳壓實機是實現該深度厚度的適當壓實所必需的。

　　Wirtgen offers CR series and WR series cold recycling machines. The CR series machines require traditional paving machines, while the WR series cold recycling machines and soil stabilizers do not. According to Starr, for typical full depth recycling (FDR) applications that recycle aggregate into asphalt at depths of 8 to 12 inches, where the aggregate is recycled for asphalt, the equipment team will use a rubber tire WR series machine, as well as a sheep foot roller and a grader, followed by two compactors. The sheep foot compactor is necessary to achieve appropriate compaction at this depth and thickness.

　　CR機器非常適合三到五英寸的部分深度更換。需要更少的整體壓實，可以通過在鋪路機上安裝標準振動熨平板來實現，然后使用壓路機即可完成。在這種情況下，無需使用羊腳壓路機或平地機。

　　CR machines are very suitable for partial depth replacement of three to five inches. Less overall compaction is required, which can be achieved by installing a standard vibrating screed on the paving machine and then using the roller to complete it. In this case, there is no need to use a sheep foot roller or grader.

　　當與高密度熨平板配對時，CR機器可用于FDR，但這并不常見。Stahl將這種應用稱為“攤鋪機鋪設FDR”。

　　When paired with high-density ironing boards, CR machines can be used for FDR, but this is not common. Stahl refers to this application as "paver laying FDR".

　　本文由 冷再生機租賃 友情奉獻.更多有關的知識請點擊  http://www.cpssc145.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click http://www.cpssc145.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.